Skip to content
Last updated on 2019-07-17

MOX D (SFP)

Key features

The MOX D module contains an SFP connector for an optical connection with speeds of up to 2.5 Gbps.

Specification

Picture of the board

  • 1× WAN port up to 2,5 Gbps SFP
  • 1× 64 pin female connector and 1× 64 pin male connector for connection additional modules
  • 2 years warranty
  • Size: 105 mm × 58 mm × 30 mm (without case)
  • Ambient operating temperature: 0 °C to 40 °C (40 °F to 104 °F)
  • Humidity: 10% to 90% RH, Non-condensing

Compatibility

There can be only one MOX D module in the configuration; the SGMII bus is terminated there. For this reason, the MOX D cannot be combined with MOX C.

This module can be used only as an extension in a set. You will need at least MOX Start. If you’re combining it with other modules, make sure they are compatible. You can verify the order of modules and pass-through of PCIe and SGMII signals in the configurator on https://mox-configurator.turris.cz.